Replacing Coating Faux Leather Chair
Replacing Coating Faux Leather Chair – Whatever the reasons for this desire to carry it out and replace the upholstery on the faux leather chair is not as difficult as it seems too many. Of course, much depends on the design of the chair, as the material for the coating can act as a special fabric upholstery and faux leather. It is also recommended to purchase and replace the foam pad as the old chairs for a long time serve you faithfully. Take necessary foam thickness of 3 cm or more, if you like, the chairs were softer.
Remove the seat and the back of the faux leather chair, as if the coated material. Turn dismantled the seats and put down on the floor or other suitable and convenient for working surface. When the old interior will be dismantled, cut piece of foam seats and make the pattern of the upholstery, repeat seats with indented 4.5 cm and securing straps below the upholstery. On top, place the upholstery foam, and foam chair seat.
12 Photos Gallery of: Replacing Coating Faux Leather Chair
Good pull trim; add support to the seat back. Keep the padding is not drawn, and not moved out in one direction, as in this case, you will not be able to solve the problem on the other side. Pay special attention to corners, creases trimming them neatly turned out. If some of the staples hammered if necessary, remove them with a screwdriver and pliers.
See faux leather chair from below and view faux leather chair from above. Once the seat is too tight, Binding to the chair seat from the back of a little more complicated. Attach the back of the chair. On a chair time required to reach the coating tug 1-1.5 hours if you do not want the back upholstery.