Install the Door Stop to Shower Doors Frameless
Shower doors frameless – To create an elegant and seamless appearance for your shower is easy when you install a frameless shower door. These doors generally operate on a pivot that controls how the door swings in and outside the barn. You can stop the door from going too far into the shower cubicle and protect the wall with a door stop on the shower door frameless.
Select an oblique style shower doors frameless stop to fit your glass door. Slide the incline or open side of the door stop over the top edge of the panel glass in your glass-enclosed shower. Distribute door stopper to the tube with a nylon-tipped screw by means of a socket wrench. Keep the glass door in place and insert the end of a small nail at the bottom of the door hinge at the top of the door.
Tap the nail lightly with a hammer until you can grasp the pin from the top hinge. Keep the half-hinge pin inside to hold together the hinge. Push the hole on the pivot door stop over the pin until it sits flat on the hinge so arm with rubber stop faces the shower wall. Strike pin back into the hinge lightly with a hammer until it is tight inside the hinge. Adjust door stop of your shower doors frameless.