Assembly Metal Bed Frame Twin Style
Metal bed frame twin – bed frames is that portion of the bed, all of which forget. Used to hold the box spring in a fixed position, they are outlay for both headboards and floor boards to complete the bottom half of the bed. A mattress is placed on the box spring to complete the sleeping system. Most bed frames are constructed of shaped beam which is relatively light in weight yet extremely strong. With the exception of a king size bed system, most bed frames easily be configured to support twin, full and queen size sleep systems. Setting up a bed frame is easy to do.
Move all room furniture away from the area where the metal bed frame twin will be installed. It’s a good idea to vacuum the area where the bed is placed, as it will be unavailable for quite some time to do it without moving the potentially heavy bed system. Open bed frame package and remove the contents. Replace the four wheel wheels into the four “legs” of the bed frame placed on the lower of the two beams.
Spread “cross arm” on each frame rail. “Cross arms” are attached to the frame rail, where the wheel was inserted. Lock “cross arms” together by carefully adjusting studs of the one frame rail “cross arm” in the open slots of the other frame rail “cross arm. Insert the plastic insert into the ends of the” cross arms “that is on top of the frame rail connections. Add a headboard or foot board as desired by adjusting these components with the oblong holes at each end of the metal bed frame twin rails.